top of page

TCS: A New Generation of Coarse Fines Separators

Our coarse fine separator (TCS) is the latest innovative separator for the beneficiation of coarse coal slimes in the 2-0.15 mm size range. In the TCS separator, slurry enters the feed well first & goes downward inside the separation chamber where a fluidized bed is formed when the slurry meets an upward water current. When the system reaches a steady state, particles with higher densities than that of the fluidized bed percolate through the bed and report to the reject stream while lighter particles report to the effluent stream becoming the clean product. As the heavier particles settle toward the bottom of the separation chamber, they are agitated by a mechanical device to further free those entrained lighter particles in the downward materials, creating a secondary separation and improving the product recovery.

TCS.png

The working principles of the TCS might remind you the teeter-bed-separator (TBS). Indeed, these two types of coarse fine separators share some common features. The key difference between the two is the TCS’s proprietary control system that makes it a smart device:  in the TCS, the real-time effective bed density is accurately measured and maintained via probes installed inside the separation chamber, and the advanced control system makes CONTINUOUS tailing discharge possible (shown below), as opposed of the intermittent tailing discharge through a valve typically used on the TBS separator.

TCS 1.png

Key features:

  • Low Ep ≤0.09 (for 1-0.25 mm feed)

  • Wide separation density range, from 1.4 to 1.8 g/cm3 with tolerance of±0.001 g/cm3

  • High throughput

  • Free of tailing blockage with an active tailing discharge mechanism

  • Smart separation density control system enables unattended operation 

  • Stable performance for changing feed properties

  • Improved clean coal recovery

Sample performance data from a commercial application:

Size (mm)
+1.5
1.5-1.0
1.0-0.5
0.5-0.2
I
0.12
0.14
0.12
0.15
Ep
0.04
0.05
0.06
0.08
ΔP
1.29
1.36
1.45
1.56
Product Ash (%)
4.28
5.19
6.41
7.73

Note: feed ash 18.87%, feed size range 2-0.2mm

Available models:

Model
TCS-1x30
TCS-1x40
TCS-1x50
TCS-1x60
TCS-1x70
TCS-1x80
TCS-1x90
Ep
Ep≤0.09 (for 1-0.25mm)
Ep≤0.09 (for 1-0.25mm)
Ep≤0.09 (for 1-0.25mm)
Ep≤0.09 (for 1-0.25mm)
Ep≤0.09 (for 1-0.25mm)
Ep≤0.09 (for 1-0.25mm)
Ep≤0.09 (for 1-0.25mm)
Feed particle size (mm)
2-0.15
2-0.15
2-0.15
2-0.15
2-0.15
2-0.15
2-0.15
Weight (t)
2.5
4.0
5.0
6.0
7.5
8.0
9.0
Dimension (mm)
Φ1932x4800
Φ2232x4900
Φ2532x5000
Φ2832x5000
Φ3232x5100
Φ3432x5100
Φ3732x5100
Volume of rising water (m³/h)
20-40
35-60
50-80
70-100
100-130
120-160
150-200
Capacity (t/h)
30-40
40-60
60-80
80-105
105-130
130-160
160-195
Diameter (mm)
Φ1500
Φ1800
Φ2100
Φ2400
Φ2700
Φ3000
3300
bottom of page